Dri-Wash 'n Guard® Directions

Because very few spray bottles are capable of atomizing Dri Wash 'n Guard® properly or withstanding long-term exposure to its chemical composition, it is extremely important that Dri Wash 'n Guard® be applied with a Dri Wash 'n Guard® AIRosol sprayer only. For use on hard non-porous surfaces only. Pre-test on inconspicuous area before general use. Do not store AIRosol bottle pressurized. Can be used over surface containing a moderate level of dust, road grime or salt.

Refill Procedure:

	Unscrew collar nut at neck of AIRosol bottle and remove internal spray mechanism.
	Invert bottle of product, shake vigorously for 15-20 seconds.
	Pour contents into AIRosol bottle until 75% full.
	Re-install spray mechanism and collar nut.

Directions by Hand:

	Apply product to cool, dry surface in shaded area....out of the wind if possible.
	Use two soft, clean, terry-cloth towels...one for cleaning/polishing and one for buffing.
	Invert AIRsol bottle and shake vigorously for 15-20 seconds.
	Pressurize bottle by pumping cap "up and down" until strong resistance is felt (approx 10-15 times).
	Spray a light coat of Dri Wash 'n Guard® on a small section of vehicle (2-3 sq. ft), spraying with broad, sweeping motions where possible.
	With moderately firm pressure, rub polish thoroughly over the sprayed area until the filmy haze that develops almost totally disappears.
	Immediately buff remaining haze to a high gloss with second terry cloth towel.

Directions by Machine:

	Use a conventional or orbital-type buffer equipped with a foam polishing pad. Do not exceed 2,400 r.p.m.
	Apply Dri Wash 'n Guard® as described in steps 3, 4, & 5 above.
	Immediately buff sprayed area to a high gloss.
	Continue, section by section, until all accessible areas have been fully buffed.
	Polish any remaining areas by hand if necessary.

For ultimate surface restoration use Dri Wash 'n Guard® OxyGone® as Step 1 and Dri Wash 'n Guard® Waterless Car Wash & Protective Glaze as Step 2.

See: Detailing Tips

Caution: Use under well ventilated conditions.

First Aid Treatment: If swallowed, call physician or poison control center immediately. Contains petroleum distillates.

Unique uses

Refill Procedure:

Directions by Hand:

Directions by Machine: